Standard Plastisol Inks
Florida Flexible standard colors are all-purpose Plastisol inks designed for printing directly on 100% White substrates or for over-printing onto flashed white. They have great Build-up resistant, a wide standard color range and are excellent for automatic and manual printing.
PRINTING RECOMMENDATIONS:
Substrates: Lights and Dark 100% cotton
Mesh count: 86-125ct, for higher detail: 125-230ct
Squeegee: 70d-75d Medium Durometer
CURING TEMPERATURE:
Gel or Flash-cure: 230°F - Full Cure: 320°F
Curing tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.
MODIFIERS AND EXTENDERS:
Our Plastisol inks should be stirred first to determine if modification is necessary. 3001FF Soft Hand Clear Base or 3000FF Curable Reducer can be added to extend and soften hand. Refer to Bases and Additives Technical sheets for additional information.
* Additions greater than 20% (by weight) will affect opacity/coverage.
Florida Flexible standard colors are all-purpose Plastisol inks designed for printing directly on 100% White substrates or for over-printing onto flashed white. They have great Build-up resistant, a wide standard color range and are excellent for automatic and manual printing.
PRINTING RECOMMENDATIONS:
Substrates: Lights and Dark 100% cotton
Mesh count: 86-125ct, for higher detail: 125-230ct
Squeegee: 70d-75d Medium Durometer
CURING TEMPERATURE:
Gel or Flash-cure: 230°F - Full Cure: 320°F
Curing tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.
MODIFIERS AND EXTENDERS:
Our Plastisol inks should be stirred first to determine if modification is necessary. 3001FF Soft Hand Clear Base or 3000FF Curable Reducer can be added to extend and soften hand. Refer to Bases and Additives Technical sheets for additional information.
* Additions greater than 20% (by weight) will affect opacity/coverage.
Color Card
