Squeegees

Our Pleiger PT-22® is excellent for most screen printing applications and is color coded for easy Durometer reference by the printer. Plei-Tech® 22 exhibits very good solvent resistance and excellent abrasion resistance against UV, Epoxy, Enamel, Vinyl and other solvent based ink systems. Inferior quality squeegees tend to; decrease in Durometer, swell, and become dull at an accelerated rate due to their inability to resist the harsh solvents and abrasion against the stencil. Our PT-22® squeegees are recommended because of their chemical resistance and exceptional abrasion resistance when exposed to aggressive ink systems.

Squeegees are sold by the inch or by the roll, Size: 144" long (12'ft). Standard size: 3/8 x 2"

Squeegees

FIMOR has been an innovative and leading manufacturer of High Performance polyurethane screen printing squeegees since 1986. Our compounds are custom formulated to achieve high solvent resistance and excellent abrasion resistance. This combination results in a squeegee blade that will better maintain its durometer when subjected to aggressive inks and solvents, show minimal swelling during the print run, and retain its sharp edge longer allowing for continued quality during the screen print run, thereby increasing productivity.

Standard Durometers:

60duro - Orange or Red
70duro - Yellow or Green
75duro - Green
80duro - Blue
85duro - Red
90duro - Natural/White

Triple Blade Durometers:

60/90/60duro - Orange/White/Orange
70/90/70duro - Green/White/Green
60/90 & 70/90 Dual Composite Squeegees

Single Durometer SR1

Triple Durometer SR3

Triple Durometer HR3

Wooden Squeegee Holders

Wooden Squeegees

Economize with our wooden squeegees, light weight yet strong design for today's printer. Available in 4" height handles equipped with 70duro/medium blade. Sold by the inch or in full 72" inch lengths to conveniently cut down to size.

Squeegee RACK

Squeegee CUT

Aluminum Squeegee Holders

Aluminum Squeegees

Our new Aluminum design allows the printer to flip the blade for maximum use, their conveniently designed for switching blades and clean up easier than wooden squeegees. Manual Aluminum squeegees are sold by the inch and are available in sizes: 4” up to 18” long. Choose your blade durometer when ordering.

When it comes time to sharpening... trust the job to the professionals.

FIMOR Squeegee Sharpeners

FIMOR - Squeegee Sharpener

Serilor®SHORT-CUT Diamond wheels sharpener

DSC-220
The first precision small-format, manual, squeegee sharpener for squeegees 20” and under.
The portable, table-top design fits anywhere and uses an indestructible diamond sharpening wheel.