Waterbase Pigments
Waterbase Inks
Waterbase inks not only provide a softer hand print but they have a softer impact on the environment. Today’s Waterbase inks are more Eco-friendly, they clean up quick and easy with water or a mild bio-degradable Ink Wash.
To achieve proper curing it is necessary to cure waterbase inks and discharge inks with a conveyor dryer at 300F for 2-3 min. Flash curing is not recommended.
Printing Parameters:
Substrates: Cotton, Polyester and 50/50% Blends
* White and Pastel color fabrics only
Emulsion:Water Resistant /Dual-Cure (Textile DW, Graphic DX or Graphic HU)
Mesh: 86-156ct t/in
Curing Temp: 300°F for 2-3 min.
Clean Up: Water or Ink Wash
* Waterbase Colors are very transparent and are designed to print on White fabrics only.
To achieve proper curing it is necessary to cure waterbase inks and discharge inks with a conveyor dryer at 300F for 2-3 min. Flash curing is not recommended.
Printing Parameters:
Substrates: Cotton, Polyester and 50/50% Blends
* White and Pastel color fabrics only
Emulsion:Water Resistant /Dual-Cure (Textile DW, Graphic DX or Graphic HU)
Mesh: 86-156ct t/in
Curing Temp: 300°F for 2-3 min.
Clean Up: Water or Ink Wash
* Waterbase Colors are very transparent and are designed to print on White fabrics only.
Waterbase Additives
- WB Softener
- WB Retarder
- WB Extender Base
- WB Stretch Clear & White
- WB Fixer N
Waterbase Specialty
- WB Metallic Silver
- WB Puff Base
- WB Crack Binder
- WB Burn-Out
- WB Shine Binder
Waterbase Metallic Silver & Colors
WB Metallic Inks
Metallic Binder 301 - A silver metallic shimmer base that can be used as a stand alone product or be combined with 301 ECO-Series pigments to change the look and color of a design. Great for use on 100% cotton or poly/rayon/cotton blends. Screen mesh recommendations up to 120.
Printing Parameters:
Substrates: Cotton, Polyester and 50/50% Blends
Emulsion:Water Resistant /Dual-Cure (Textile DW, Graphic DX or Graphic HU)
Mesh: 86-110ct t/in
Curing Temp: 300°F for 2-3 min.
Printing Parameters:
Substrates: Cotton, Polyester and 50/50% Blends
Emulsion:Water Resistant /Dual-Cure (Textile DW, Graphic DX or Graphic HU)
Mesh: 86-110ct t/in
Curing Temp: 300°F for 2-3 min.
Waterbase Stretch Base and White
Waterbase Stretch White
- Stretch Clear 301 Base - A base binder formulated for use on stretch fabrics such as Lycra-Spandex, athletic clothing etc. Add any of the Matsui 301 Eco-Series pigments for unlimited color matching capabilities. Screen mesh recommendations up to 150.
- Stretch White 301 Base - A high opaque white ink for printing on stretch fabrics such as Lycra-Spandex, athletic clothing etc. Screen mesh recommendations up to 150.