Transfer Textile Foil

  Screen printing with Foil effects 

Foil Print
Foil Print
Specially formulated and quality-tested, Textile foil was developed to provide a high tolerance within a broad temperature range and an easy release. No other foil in the market comes close to the excellent wear-ability and superior wash-ability of this foil. You are going to love our Textile foils and the beautiful metallic brilliance our wide selection of shades we provide. Textile Foils offers the perfect metallic shades for textile foil. 
Decorating fabric couldn’t be easier; our foil transfers easily and produces a clean, sharp, bright metallic finish. _

Application

_Recommended settings for heat transfer machines:
Temperature: 330°F - 385°F
Pressure:        Medium/Firm
Dwell Time:    8 - 15 seconds

Instructions

_
  • Prepare the Art work for direct printing.
  • Screen print the garment with plastisol foil adhesive. Use Mesh count: 60ct/in and 110ct/in.
  • When printing Automatic: Flood>Print>Flash>Print could be used with an 86ct/in mesh.
  • When printing Manual: Print>Flash>Print with an 86ct/in or 110ct/in mesh is suggested.
  • Cut the textile foil to the desired shape and place it face up over the printed adhesive, (color side up), avoid any area of the design with plastisol inks that the foil should not be touching. Implement waterbase inks if other areas of the design are too close to the foil area. 
  • Using the above settings, transfer the foil.
  • Once removed from the transfer machine, use a soft cloth to rub the foil lightly to ensure strong adhesion and full coverage.
  • For best results, wait to cool, then peel foil away.

This is a typical transfer process. However it is the customers' responsibility to test the suitability of the respective foil for the field of application they intend it for and under their transferring conditions. Adjust appropriately until desired results are
achieved.