Super Opaque Colors for Printing on Dark Fabrics
Genesis Super Opaque colors are excellent for automatic and
manual printing directly over Dark substrates. They have great
Build-up resistant and a wide standard color range. Genesis
Super Colors offer superb opacity and are great for over-printing
onto flashed white!
| PRINTING RECOMMENDATIONS: |
For optimum opacity when printing on
Darks 100% cotton use Mesh count 86-125ct, when overprinting
and fine line printing use mesh 125-280ct
Use Medium Squeegee Durometer and Straight Edged. |
| CURING TEMPERATURE: |
Gel or flash-cure: Approximately at
230°F - Full Cure: 320°F
Curing tests should be made prior to any production
run. Failure to cure properly causes poor wash fastness,
inferior adhesion and increased dye migration. |
| MODIFIERS AND EXTENDERS: |
Genesis Inks should be stirred first
to determine if modification is necessary. 10140CLEAR Soft
Hand Clear and 10150FNS Finesse can be added to extend and
soften hand at 10-15% by weight.
* Additions greater than 20% (by weight) will
reduce opacity.
10070RDCR Curable Reducer can be added to reduce viscosity
at a Maximum addition of 5% by weight. |
Genesis SUPER Colors |
23801 Spice Brown |
67050 Super Royal |
90010 S. Fluo. Yellow |
30401 S. Dolphin Orange |
70501 Dallas Green |
90110 Super Fluo. Blue |
34800 Super Orange |
75301 Super Turquoise |
90210 S. Fluo. Green |
40500 Super Red |
74240 S. Alpha Lime |
90310 S. Fluo. Orange |
42270 Super Drake Red |
75601 S. Spring Green |
90410 Super Fluo. Pink |
47030 Super Fuchsia |
80000 Super Gold |
90510 S. Fluo. Neon |
57010 Super Purple |
80100 S. Light Gold |
90610 Super Fluo. Red |
57130 Super Fuchsia 3 |
80010 Athletic Gold |
90710 S. Fluo. Magenta |
60007 S. Marine Blue |
87020 S. Lemon Yellow |
90810 S. Fluo. Purple |
67040 Super Bright Blue |
87030 Super Primrose |
12008 Amazing Base |
12008AB Amazing Base is a Super Opaque Base that provides
superb coverage over Dark substrates. |
Bright Tiger White 11480HT is our most opaque
white, is the excellent choice as both a stand-alone and an under-base
white. Extremely true, optically bright white gives you the best
coverage possible over 100% Cotton and Cotton Blends.
Mesh: 86-125 t/in when printed directly on Darks or 140-230 t/in
when under printing.
software works with Adobe Photoshop to separate your designs
to a 4 Color CYMK or Spot Process utilizing a standard color gamut.
Wilflex makes color separation easy with EasyArt.
Request your Wilflex Textile User Guidetoday
Halftone Inks
for Four Color Process Printing Genesis process inks
are formulated to achieve the cleanest and highest intensity colors
for textile process screen printing. These pure, transparent colors
are designed for high productivity, direct wet-on-wet printing.
Genesis Process colors have excellent resistance to build-up,
superb printability, extremely soft hand and minimal dot gain.
| PRINTING RECOMMENDATIONS: |
Substrates: White
100% Cotton & Cotton blends
Mesh: 305 to 355ct Tensioned at 25 (newtons)
Squeegee: Medium to Hard durometers. |
| MODIFIERS AND EXTENDERS: |
To extend or reduce use 10140Clear
Soft Hand Clear or 10000GNS Halftone Base at 15-20% by weight.
|
Genesis PROCESS Colors |
19850GNS
Process Black |
49850GNS
Process Magenta |
69850GNS
Process Cyan |
89850GNS
Process Yellow |
10140CLEAR
Soft Hand Clear |
10000GNS
Halftone Base |
|
Wilflex Nylon Mesh series ink is designed for direct printing on
Athletic uniforms, Nylon micro-mesh, Porthole and Dazzle cloth nylon
game Jerseys . When printing, allow one flood followed by two print
strokes. Perform fusion tests before production; check the cure
temperature at the ink surface . Follow testing procedures
outlined in the Wilflex User’s Manual
S1100NP Nylon Plus White provides excellent
opacity over dark 100% Nylon Mesh Athletic uniforms and Bags.
Use Mesh: 60-110 t/in
Use Wilflex Nylon Catalyst HG when printing
on waterproofed nylon materials such as Jackets or garments treated
to repel water. Add Nylon Catalyst to enhance the performance
of Nylon Mesh inks or to your standard Plastisol inks at a ratio
of 10%percent by weight.
Wilflex Select-A-White |
11003CAL
Flash White |
Under base white for flashing. Our
most economical White |
100% Cotton |
11027CAL
Lunar White SO-LB |
Super Opaque and Low Bleed
Excellent as underbase |
100% Cotton
50/50% Blends |
11123HT
POP Bright White |
Bright and creamy white, excellent opacity |
100% Cotton
50/50% Blends |
11480HT
Bright Tiger White |
A very Bright & High Opaque White. |
100% Cotton
50/50% Blends |
11999XW
Extreme White
|
Fast flashing White
No after tack |
100% Cotton
50/50% Blends |
11117HT
PolyWhite |
Bleed resistant and prevents dye migration on Polyester |
100% Polyester
50/50% Blends |
11003WHT
Athletic Trophy White |
Low Bleed
High Opacity |
50/50% Polyester Blends |
11000TF
Super Transfer White |
Hot Split Transfer Printing
High Opacity |
Matte & Gloss Paper
50/50% & 100% Cotton Blends |
S1100NP
Nylon-Plus White |
Matte Finish & High Opacity for Nylon Mesh fabrics |
Nylon Mesh
Dazzle cloth Athletic uniforms |
11000NPF
Nu-Puff White |
Premium Puff White
Good Opacity |
100% Cotton |
11815HT
Buffalo Opaque White |
High Opacity & Good printability thru higher mesh
counts |
100% Cotton
50/50% Blends |
S1100PM
PolyMax White |
Bleed resistance thru higher mesh counts |
100% Polyester
50/50% Blends |
11000SSV-FF
Stretch Opaque White |
Excellent for Stretch materials with Superb elongation |
100% Spandex & Lycra Dark colored Garments |
S1100CP
Cotton Pro White |
Good Opacity and excellent viscosity for the manual
printer |
100% Cotton & Blends |
|
Semi-Opaque Heat Transfer Inks formulated for white or light substrates.
This ink offers improvements in printability and transfer latitude
over conventional hot-split inks. Use for Hot-Split or Cold-Peel
process.
Super Opaque transfer inks are formulated to give the appearance
of a direct print over dark garments. Transflex Super colors give
excellent opaque prints of high definition using fine screen meshes
over dark fabrics. Use for Hot-Split or Cold Peel process.
| PRINTING PARAMETERS: |
Substrates: Knitted fabrics, cotton,
linens, polyester blends & rayon.
NOT RECOMMENDED for woven Nylon or Lycra.
Mesh 60-86 t/in (24-34 t/cm) for better opacity.
Mesh 110-195 t/in (43-77 t/cm) for fine lines.
Transfer Temp: 365-375°F – Gel Temp: 195-230°F
Transfer Pressure: 40-45 PSI – Transfer Time: 5-7
seconds |
Transflex
Printable Adhesive 10210TF will improve the adhesion
of Transflex Inks to a far wider range of substrates when cold-peeled.
Use Transflex Transclear 10007TF as a clear
backer to extend the wash and durability of every transfer. As
a first down print for Transflex TUF Base extends the stretch
and wash durability of the PUFF. Transclear Base can be used as
a Mixing Base when creating Flourescent colors and Glow in the
dark transfer colors.
Transflex
TUF Neutral Base 10480TUF and 11000TUF White
produce multi-dimensional graphics, either as an all-in-one puff
ink or as an under-print to the Transflex hot-split inks. TUF
Neutral Base can be used in combination with 5-8 percent of pigment
concentrate (PC) by weight to create colored puff.
Transflex Base 10440TF can be used when color
matching by using the Wilflex PC Pigment system, create your own
line of colors or color match any Pantone using our IMS PC color
matching software. Call us today for information on how to get
started.
PC Express Mixing System by Wilflex
PC Express is a Pigment Concentrate and Base system that
allows the user to simulate PANTONE colors with just 15 PC’s
and a Multi-Purpose Base. It’s easy to use and mix, PC Express
system gives you total ink room control.
IMS Download
This is the full installation of the IMS Ink Management System version 6.4.37. Last update Feb 18/08 2:00 pm This version is compatable with DispenseMaster IV or newer versions only. Contact your Wilflex representitive for DispenseMaster configuration.
• DOWNLOAD IMS HERE (24mb)
Pigment Concentrate Colors |
10110PC Extra White |
10700PC Green |
18000PC FL Yellow |
| 10940PC Velvet Black |
10570PC Violet |
18060PC FL Red |
| 10870PC Bright Yellow |
10680PC Blue |
19040PC FL Pink |
| 11300PC Bright Orange |
10450PC Maroon |
18010PC FL Blue |
| 11650PC Marine Blue |
10470PC Magenta |
19080PC FL Purple |
|
MX
Color Matching System by Wilflex
The MX Mixing system is a simple finished ink system
that allows you to simulate PANTONE colors. With just 15 intermixable
colors made with an opaque base. MX colors are single pigment,
strong, bright colors with improved crock resistance.
MX Mixing Colors |
88888 MX Yellow |
68889 MX Blue |
98880 MX Fluo. Pink |
| 38888 MX Orange |
58888 MX Violet |
98886 MX Fluo. Blue |
| 48888 MX Red |
78888 MX Green |
98885 MX Fluo. Purple |
| 48889 MX Magenta |
98888 MX Fluo Yellow |
98888 MX Black |
| 68888 MX Marine |
98884 MX Fluo. Red |
11888 MX White |
|
All Wilflex STARTER MIXING KITS include CD-ROM formulation software
and a Pantone Color Guide, call us for more information.
Wilflex Metallic and Shimmer Inks
have excellent rub and wash resistance. The inks will cover both
light and dark garments without under-printing. Use alone or in
combination with High-Density, Puff or Gloss Bases to produce unique
metallic effects. Mesh: 60-125 t/in.
Also available 10988LS Liquid Silver, an ultra bright
solid chrome metallic effect when printed thru 86-110ct meshgives
you the closest look to a foil effect.
MCV-FF
Glitters have been specially formulated to give maximum
coverage over light and dark garments. The glitters colors have
been incorporated in the clearest, glossiest Plastisol base available.
Our Glitters will produce a dramatic effect with excellent wash
durability. Recommended Mesh: 20-40 t/in.
Need additional Glitter colors we stock over 22 standard
colors available for immediate delivery, order pre-mixed for plastisol
or waterbase production or dry flakes for you in house mixing.
15340IS Yellow Sparkle & 15005IS Crystallina RT is
an ink formulated to produce high gloss sparkle effects with excellent
durability. Print Crystallina directly on white or light colored
fabrics. Also, incorporate Crystallina as an over-print on your
designs. Recommended Mesh: 25-60 t/in.
Wilflex IMAGEBRITE REFLECTIVE inks are formulated
for direct printing on textiles. The Imagebrite reflective base
is combined with aluminum coated glass beads to produce highly
REFLECTIVE INK. Available in Silver Metallic, Black and Medium
Grey. Add up to 6 percent of pigment concentrate (PC) to the Imagebrite
Base 10344REF to create amazing reflective colors. Mesh:
110-156 t/in.
99900GNS Glow in the Dark Inks are transparent,
print on white or over light colored Plastisol inks. The life
of gloss cycle is near infinity. Also available is GLOW
IN THE DARK POWDER it can be added to a variety of Bases
including Puff Base to create Phosphorescent Puff effects. Recommended
Mesh: 60-140 t/in.
Need more GLOW POWER ? use 99950GNS Wilflex Kosmic Glow
series now offering you a Glow in the Dark Green and 6 additional
colors with twice the strength.
Wilflex
NU-PUFF Color Series are formulated to give an
elevated surface and 3 dimensional effects, have excellent durability
and overflow resistance. 10250NuPuff Base can be added to your
standard Plastisol inks to create puff colors. Mesh: 60-110
t/in.
SPECIALTY INKS (Acrobat required):
WHITES (Acrobat required):
BASES, ADDITIVES & COLOR MIXING SYSTEM (Acrobat required):
GENESIS & PANTONE COLORS (Acrobat required):
WATERBASE PRODUCTS (Acrobat required):
|