Waterbase Discharge Inks

• WTD010 Discharge ZF Binder
• WTDZFS Discharge ZF Activator (Powder)
• WTD000 Discharge ZF Premix White

* Other colors can be prepared by mixing waterbase Pigment Concentrates to the Binder.

Florida Flex's Water-Based Discharge System offers four distinct discharge systems, two formaldehyde-based & one non-formaldehyde discharge systems for use on 100% cotton dischargeable fabrics with reactive dyes, plus a discharge system for indigo/denim dyed fabrics.

Binder 801 / Printgen 801
Discharge system for indigo denim fabrics and can be used with or without pigments.

NEW! DSPS Discharge Binder
Discharge System for reactive dyes. DSPS contains formaldehyde in the discharge agent. This is an excellent, highly pigmented discharge system. Provides a softer hand than our popular DSM-2 Discharge Base and also Wilflex Oasis ZF and NF Discharge Bases.

Wilflex Oasis Discharge system provides a Non-formaldehyde (NF) base & component series:

• Oasis Discharge NF Base
• Oasis Discharge NF Super White
• Oasis NF Activator (Powder)

Keep in mind that NOT all garments are dischargeable; please contact our technical dept. for additional information. Water resistant Emulsion and Block out is required for this production.

Waterbase BURN-OUT System

This is a 3 part system that requires all parts to be mixed prior to use and once the garment is printed, cured and washed the full effect desired can be seen. It is important that you pre-test your garment prior to production, contact our Technical dept. for additional information.

Water resistant Emulsion and Block out is required for this production.

Whether you are printing on Towels or T-shirts, waterbase inks offer you a softer hand feel by penetrating deep with the fabric. Opaque colors are available for darker substrates.

If you are printing with waterbase inks for the first time, please contact our technical dept. for assistance on screen preparation and other requirements.

Water resistant Emulsion and Block out is required for this production.

Waterbase Ink Systems

301 ECO-Series WATER-BASED INK SYSYTEM
Matsui's new 301 ECO-Series Water Based Ink System base binders, pigments and inks are specifically designed for today's high speed automatic screen printing presses. The eco-friendly 301 ECO-Series inks offer advantages over the traditional plastisol inks and are superior to plastisol ink systems currently being used in high volume textile shops.

Advantages:

• Free of most environmentally damaging chemicals such as PVC, phthalate, heavy metals, azo compounds, nonylphenol and formaldehyde.
• Ability to use wide range of mesh counts up to 300+.
• Exceptionally soft hand,
• Intense pigment colors,
• Ease of use and breath ability of the ink on fabric.
• Ability to achieve entire Pantone Color range using our 13 basic Pantone colors.
• Formulated for tack free enhanced screen stability which prevents in screen drying and allows for faster and cleaner prints.

The new generation 301 ECO-Series inks are available in 3 formulations.

• 301 RC - transparent ink
• 301 OW - semi-transparent ink
• 301 HO - High Opacity ink
  

9 Extender Base Formulas:

301 C Clear base - A clear binder base for use on white and light colored fabrics. Can be printed through a high mesh count screen up to 305 which will produce an ultra soft hand. Mix 5-10% pigment to binder by weight.
301M Matte base - A semi opaque matte white binder base for use on colored fabrics. Can be printed through a high mesh count screen up to 305. Mix 5-10% pigment to binder by weight.
301W base - A high opaque white base for use on dark or colored fabrics. Can be used as an under-base, high opaque spot white ink or mixed with pigment (5-10% pigment to base by weight) Mesh counts up to 305.

301 Top Clear - A platform base for printing on top of a white under-base on dark fabrics. Provides better adhesion of top colors to white base. Screen mesh recommendations up to 250.
301 Top White - A high opaque white ink for use over under-base to increase opacity. Also provides better adhesion and printability for top colors to under-base. Screen mesh recommendations up to 250.
301 Stretch Clear base - A base binder formulated for use on stretch fabrics such as Lycra-Spandex, athletic clothing etc. Add any of the Matsui 301 Eco-Series pigments for unlimited color matching capabilities. Screen mesh recommendations up to 150.
301 Stretch White Base - A high opaque white ink for printing on stretch fabrics such as Lycra-Spandex, athletic clothing etc. Screen mesh recommendations up to 150.
301 Under Coat Binder - A high opaque under-base used to prevent dye sublimation on polyester fabrics. Screen mesh recommendations up to 100.
301Metallic Binder - A silver metallic shimmer base that can be used as a stand alone ink or mixed with 301 ECO-Series pigments to create metallic colors. Screen mesh recommendations up to 120.

Waterbase Pigments (Color card HERE)

Get total ink-room control for color matching and inventory with our line of 22 Waterbase Pigment concentrates. Reduce waste and excess ink inventory by mixing what you need and the flexibility to make opaque, semi-opaque, transparent & Discharge colors. Use in combination with our specialty bases: 4T & 3T Extenders, Discharge and Puff Clear Bases.

Bases, Additives and Extenders:

Extender 3T is a ready to use printing ink that is mixed with a water based pigment and is usually printed onto white cotton or cotton/poly blend fabric.

Extender 4T is an opaque, ready to use printing ink. Like with the Extender 3T, the Extender 4T can be mixed with a water based pigment, but it is printed onto dark or colored fabrics.

Supper Rubber White is a ready to use elastic, printing base. This binder allows the printing image to be stretched with minimal cracking.

Super White 0116 is a ready to use opaque printing base for dark colored fabrics, but provides a much softer hand.

Metallic Binder GT-50 is ready to use printing base that is used with metallic glitter.

Puff Clear Base HT-L and Puff Clear Base LT-S are ready to use heat sensitive clear bases that provide for three-dimensional designs and can be printed on to dark or light cotton or poly/cotton belends. The HT-L is cured at a temperature of 320°F and the LT-S is for cured at a lower temperature of 280°F.

Puff White HT-L and Puff White LT-2 are ready to use heat sensitive white bases that provide for three-dimensional designs and can be printing on to dark or light cotton or poly/cotton blends. The HT-L is cured at a temperature of 320°F and the LT-2 is cured at a lower temperature of 280°F.

Crack Binder 812 is a matte white binder that produces a crackling effect on cotton or cotton/polyester knit or woven fabrics.

Fixer F Conc is is an additive added to bases and inks to improve wash fastness. Only 2-3% is added in to the mixture.

Aroma Inks

Aroma AQ Ink is a water-based dispersion ingredient for printing onto textiles (Cotton & Polyester blends) that provides a scented print. Mix ingredient Aroma AQ scent to the Binder S and just add Pigment for color. It is available in 17 scents listed below: