D-Grade Ink Degradent
• Completely biodegradable cleaner that is specially formulated
for the removal of all types of Plastisol inks without softening
or damaging your Stencil.
Plastisol Press Wash
• A water-soluble press side wash designed to work quickly
and efficiently on Plastisol inks, it evaporates fast without leaving
any solvent residue in the screen.
EasiSolve 820 – Screen Wash
• An extremely powerful screen wash used during the removal
of plastisol inks, never attacks the emulsion and is biodegradable
 Sten-X
– Stencil Remover Liquid
• A ready to use Biodegradable Emulsion and Capillary film
remover.
ES-530 – Concentrated Emulsion Remover
• Liquid concentrated solution easily dissolves at a ratio
of
1 to 5 parts of water to remove Emulsions and Capillary.
CER-110 Concentrated Emulsion Remover
• Highly concentrated liquid emulsion remover, easy to dissolve
at a ratio of 1 to 20 parts of water.
SMP – Stencil Remover Crystals
• Dissolve content at a ratio of 1 to 30 parts of water to
make reclaiming solution.
ES-900 - Concentrated Emulsion Remover
• Our most concentrated Emulsion remover, dissolve in water
at a ratio of 1 to 50 parts of water.
EasiSolve #5 – Concentrated Emulsion Remover
EASISTRIP - 2 in 1 Screen Reclaim Liquid
• Designed for quick and convenient removal of both Plastisol
inks and Emulsions. Allows for cleaning and reclaiming in one easy
step.
Haze Remover Paste - DeHazer 130
• Completely removes any remaining ghost or image stains that
will remain on the screen after emulsion removal. Apply to both
sides of your screen by brush and rinse with water. Excellent degreaser.
(Corrosive solution - Wear protective gear
when using this product)
Liquid Stain Remover – DeHazer 150
• Viscous liquid specially formulated to remove imbedded stains
caused by UV and Plastisol inks that remain on the screen after
emulsion removal.
(Corrosive solution - Wear protective gear when using this product)
Liquid Stain Remover – Easisolv 701
• Non-Flammable, Biodegradable solution that removes stains
and ghost images that remain on the screen following the emulsion
remover process. (Can be applied by spray)
Bio-Prep – Mesh Degreaser
• Designed to improve adhesion and proper emulsion coating.
Non abrasive fabric treatment that acts like a wetting agent.
(For use before each stencil preparation)
Super Prep – Mesh Degreaser and Abrader
• Abrasive mesh pretreatment containing microscopic grit and
a degreaser wetting agent. Designed to make fabric more receptive
to Emulsion and Capillary adhesion.
Screen Perfect – Mesh Degreaser
• Liquid, ready to use formula that degreases with excellent
wetting properties.
Finish S1 Block-out
• Water-soluble and Biodegradable Red Block-out spreads evenly
for optimal drying and filling. Use to cover open mesh areas and
pin holes.
Pro-Coat Block-out
• Quick dry water soluble, solvent resistant Block-out used
to cover open mesh areas and pin holes.
Finish W1 Block-out
• Water resistant Purple Block-out for use when printing with
waterbase inks.
The new Albatross DP Series of Screen Dip Tanks make cleaning your
screens a breeze. When used with Albatross Envirall 2-in-1 Ink and
Stencil Remover, both ink and emulsion wash out quickly and easily.
Already working with an ink-free screen? Use our DP Screen Dip Tank
with any one of our stencil removers: Albatross Sten-X, Albatross
Sten-Erase, Albatross Con-ER or Albatross SMP Crystals.
Features:
• Chemical Resistant Polyethylene Construction
• Top-Load Design with Hold-Down Lid
Chemical
Pumping System with color coded nylon coil hoses dispenses up to
3 types of chemicals, directly from 5 gal pails or 55 gal drums.
Heavy-duty Polyethylene Washout booths, Backlight for maximum visibility,
metal base for stability. Available in different sizes.
Pressure Washer pumps water at high speed to assist in screen cleaning
and reclaiming
This is a complete filtration system for removing all waste particles
from the water simultaneously while cleaning and reclaiming screens
“The right tools for the right job”
Florida
Flex would like to help you keep your reclaiming area clean and
productive with the right equipment.
Chemical Dispensing Equipment for up to 3 chemicals. Dispense product
directly from 55 gal drums or 5 gal pails, no matter the size of
your shop Florida Flex can help put everything together.
CDS-2
Chemical Dispensing Systems are available for consignment contact
us regarding our line of chemicals.
The most reliable, versatile, durable line of cleaning guns for
every textile spotting application. With a combination of high quality
and excellent value. Trust your garments to the best.
|
Washout
Sinks, Screen Dip Tanks & Recirculating Units
